Description
• Re-engineered and re-designed for 2017/8, the ST8 Evolution offers outstanding levels of illumination, which combined with the size of the unit, make it a firm favourite within the pick-up truck and commercial vehicle markets. Changes to some legislation, which now allows for the mounting of a single light source, is set to further increase the appeal and relevance of the ST8 within the road tuning and 4x4 markets, where even a single unit will provide for a very significant improvement in light distribution and visibility compared to standard vehicle high beams.
• Upgraded high-density 11W LEDs are carefully selected for their high ‘bin’ rating, and in the case of the ST8 Evolution deliver 8,272 lumens. Advanced electronic design, combined with sophisticated thermal management systems, and ultra-reflective vacuum-metallised reflectors, harness the light output into a ‘Drive’ beam pattern optimised for lower speed applications where the priority is for good all-round visibility, albeit still with enviable distance illumination – 1 lux is achieved at 393m. The colour temperature of the LEDs at 5000 kelvin has also been specifically selected to maximise sharpness and definition, while proven to reduce eye-strain associated with some higher (blue-white) colour temperatures.
• Performance aside, the ST8 Evolution is built to last. With a 5 year warranty as standard, and a lifetime guarantee on the ‘unbreakable’ polycarbonate lens, which is coated with a hardcoat lacquer to protect against any scratches, the lamp is capable of withstanding the harshest environments. An IP69K rating certifies the lamp will not be subjected to moisture or dust ingress, with additional counter-measures to ensure the unit remains fully contained even in the most extreme of temperatures and humidity. The full aluminium housing gives the lamp its strength and rigidity, while an e-coat pre-treatment provides automotive quality corrosion resistance. Dynamic drive modulation optimises light output considering the thermal conditions of the lamp (preserving the longevity of the LEDs).
• With a seamless, low profile design, the new ST Evolution range is now not only easier to install, but is more resistant to dirt, snow and ice accumulations, and the contemporary styling is guaranteed to complement and enhance the appearance of modern vehicles.
Specification
What's included:
• x1 ST8 Evolution LED Spotlight
• x2 Centre Mount (1114k)
• x1 Wiring and Installation Instructions
Technical data: | ||
Voltage Range | 9-32V | |
LED Life | 50,000 hours | |
Weight | 1150 gr | |
HIGH BEAM FUNCTION | ||
Total Luminous Flux | 8272 Lm | |
Number of High Output LEDs | 8 | |
Power Consumption | 95 Watts | |
Current Draw (at 14.4V) | 6.6 Amps | |
Start-up Time * | 100 ms | |
CERTIFICATION | ||
High Beam | ECE R112 | |
ECE Reference | 17.5 | |
DIMENSIONS | ||
Width | 364 mm | |
Depth | 68 mm | |
Height | 64 mm | |
PHOTOMETRIC DATA | ||
0.25 lx Line | 786 metres | |
0.5 lx Line | 555 metres | |
1 lx Line | 393 metres | |
3 lx Line | 227 metres | |
BEAM SPREAD | ||
Horizontal | 28 degree spread | |
Vertical | 24 degree spread | |
* 'Start-up time' is the delay between the lamp receiving voltage, and light being emitted. Different Lazer lamps have different start-up times, depending on their electrical architecture, so we recommend that if you are buying two different types of Lazer lamp, for mounting on to the same vehicle, that you ensure you pick products with matching start-up time (either 5ms or 100ms, depending on the product). Please check the lamps technical section on each product page to be sure you are purchasing lights with the same start-up time for the best performance. |